[Q29-Q44] Exam Passing Guarantee Mar 10, 2023 300-610 Exam with Accurate Quastions!

Share

Exam Passing Guarantee Mar 10, 2023 300-610 Exam with Accurate Quastions!

Test Engine to Practice Test for 300-610 Valid and Updated Dumps

NEW QUESTION 29
A database administrator experiences delay when performing storage replication between primary and secondary data centers. The data centers are located 20 kilometers apart and are connected using a 500 Mbps link. The deployment was implemented using an FCIP tunnel and a pair of Cisco MDS 9250 Series Switches. The network engineer decided to enable QoS to prioritize replication traffic. Which QoS model must be used to resolve the performance issues?

  • A. weighted round robin
  • B. differentiated services
  • C. strict priority queuing
  • D. Resource Reservation Protocol

Answer: C

 

NEW QUESTION 30
A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.
Which action guarantees line rate traffic processing on the interface?

  • A. Set local buffering with B2B_credits for the interface.
  • B. Configure the interface rate mode as dedicated.
  • C. Configure the interface rate mode as shared.
  • D. Set global buffering with B2B_credits for the interface.

Answer: B

 

NEW QUESTION 31
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.

Answer:

Explanation:

 

NEW QUESTION 32
Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

  • A. Updating
  • B. Secondary
  • C. Primary
  • D. Initial

Answer: D

 

NEW QUESTION 33
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

  • A. Ethernet and unified ports on the same port channel
  • B. cross-connections with pinning
  • C. VSS that has unified uplinks
  • D. vPC that has unified uplinks

Answer: D

Explanation:
Section: Storage Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11

 

NEW QUESTION 34
Which pools are used when a vNIC template is created in Cisco UCS Manager?

  • A. IP
  • B. MAC
  • C. UUID
  • D. WWPN

Answer: B

 

NEW QUESTION 35
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year.
Which FCoE solution meets these requirements?

  • A. single switch with multiple links
  • B. at least two VSANs across the fabric
  • C. single VSAN across the fabric
  • D. at least two FC zone sets with multiple zones

Answer: B

 

NEW QUESTION 36
Drag and drop the SAN components from the left onto the correct design considerations on the right.

Answer:

Explanation:

 

NEW QUESTION 37
An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches.
Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?

  • A. dual vNICs with static EtherChannel link aggregation
  • B. dual vNICs with MAC pinning link aggregation
  • C. dual vNICs with LACP link aggregation
  • D. dual vNICs with hardware fabric failover on the fabric interconnects

Answer: C

 

NEW QUESTION 38
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

  • A. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
  • B. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
  • C. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
  • D. 8-Gbps links and 10-Gbps links use 64B/66B encoding.

Answer: A

 

NEW QUESTION 39
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?

  • A. Appliance
  • B. Network
  • C. server
  • D. Uplink

Answer: A

Explanation:
Reference:

 

NEW QUESTION 40
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?

  • A. Appliance
  • B. Network
  • C. server
  • D. Uplink

Answer: A

Explanation:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade-server-chassis/116075-ucs-app-connectivity-tshoot-00.html

 

NEW QUESTION 41
A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.
Which configuration meets these requirements?

  • A. service profile with type set to Local
  • B. service profile template with type set to Initial
  • C. service profile template with type set to Updating
  • D. service profile with type set to Global

Answer: C

 

NEW QUESTION 42
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?

  • A. specific backup requirements
  • B. distance limitations
  • C. reduction in application performance
  • D. potential data loss

Answer: D

Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous- replication-vs-asynchronous-replication/

 

NEW QUESTION 43
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

Answer:

Explanation:

 

NEW QUESTION 44
......

Exam Questions for 300-610 Updated Versions With Test Engine: https://examtorrent.dumpsreview.com/300-610-exam-dumps-review.html