Pass Exam Questions Efficiently With NS0-194 Questions (2026)
NS0-194 Questions - Truly Beneficial For Your Network Appliance Exam
NEW QUESTION # 88 
Referring to the exhibit, the UNIX user "prof1" will be looked up in which source first?
- A. dns
- B. ldap
- C. nis
- D. files
Answer: A
NEW QUESTION # 89
You need to provide a customer an action plan to update an ONTAP system after a security bulletin has been issued. In this scenario, how do you accomplish this task?
- A. Use the Interoperability Matrix Tool.
- B. Review the ONTAP 9 product page.
- C. Use Upgrade Advisor on Active IQ.
- D. Download the target version and do a pre-check.
Answer: C
Explanation:
Active IQ's Upgrade Advisor is the tool specifically designed to help build a customized, validated action plan for upgrading ONTAP. When a security bulletin requires an ONTAP update, Upgrade Advisor:
- Analyzes the customer's specific cluster (AutoSupport data) to recommend a target ONTAP version that resolves the security vulnerability
- Checks compatibility of the target version against the installed hardware, existing configuration, and other components (SP/BMC firmware, disk firmware, etc.)
- Identifies potential upgrade risks or bugs specific to that environment
- Provides a step-by-step upgrade plan and validates the upgrade path (including any required intermediate versions) Reference: https://docs.netapp.com/us-en/ontap/upgrade/create-upgrade-plan.html
NEW QUESTION # 90
A customer has a Windows PC connected to an SMB share for a newly created volume on ONTAP storage. The share properties indicate that it has 475 GB free, the volume is configured as a 500 GBcolumn.
Which technology is responsible for this situation?
- A. compression
- B. Snapshot reserve
- C. Deswizzing
- D. Deduplication
Answer: B
NEW QUESTION # 91
What is the consequence of a loss of connectivity between a Cloud Volumes ONTAP (CVO) instance and Cloud Manager for four or more days?
- A. The CVO instance sends an AutoSupport message.
- B. The CVO instance must be added back manually to Cloud Manager.
- C. Cloud Manager removes the CVO instance from its inventory.
- D. The CVO instance is stopped.
Answer: D
Explanation:
If a Cloud Volumes ONTAP instance loses connectivity to Cloud Manager for four or more days, the instance is stopped. Cloud Volumes ONTAP depends on the management plane for licensing, control, and operational management. Temporary communication interruptions do not immediately remove the working environment from inventory or require manual re-adding, but extended loss of connectivity has enforcement consequences.
Sending an AutoSupport message alone would not be the consequence described by the scenario. Removing the instance from Cloud Manager inventory would be a management-plane display action, not the operational enforcement behavior of the instance. For support engineers, this is a cloud-control dependency question:
Cloud Volumes ONTAP is ONTAP software running in cloud infrastructure, but it is managed and licensed through NetApp cloud services. When connectivity is lost beyond the permitted window, the instance is stopped to prevent unsupported operation. References/topics: Cloud Volumes ONTAP management, Cloud Manager/BlueXP connectivity, licensing enforcement, and cloud data services operational requirements.
NEW QUESTION # 92
A manager wants a volume to have a guaranteed 300 MB/s of read performance. You explain that you cannot do this on FAS storage running ONTAP 9.3 backed by 10,000 RPM disks.
What is the reason for this response?
- A. Throughput floors required a license
- B. Throughput floors can only guarantee up to 125 MB/s.
- C. Throughput floor apply to only ISCSI access.
- D. Throughput floors required AFF.
Answer: D
NEW QUESTION # 93
The details from within Active IQ Cluster Viewer are downloadable in which three file formats? (Choose three.)
- A. CSV
- B. DOC
- C. XLS
- D. HTML
- E. PDF
Answer: A,C,E
Explanation:
Active IQ Cluster Viewer details can be downloaded in PDF, CSV, and XLS formats. These formats support the common operational needs of support and account teams: PDF for fixed presentation and case documentation, CSV for raw data extraction and analysis, and XLS for spreadsheet-based review or customer reporting. DOC is not a standard export format for structured cluster inventory or health data, and HTML is a display format rather than one of the listed downloadable detail formats in this context. Active IQ is used to analyze AutoSupport telemetry, identify risks, display system health, and provide support-relevant inventory and recommendations. Export formats matter because engineers frequently attach evidence to cases, share inventory with customers, or perform offline review. The correct selections are the formats that preserve report data in portable or analyzable files. References/topics: Active IQ Cluster Viewer, report export, PDF
/CSV/XLS downloads, AutoSupport telemetry review, and support documentation.
NEW QUESTION # 94
Users are complaining about slow file access. You suspect that the ONTAP cluster is causing the problem.
In this scenario, which ONTAP command would help you troubleshoot this problem?
- A. qos statistics volume latency show
- B. storage aggregate verify
- C. clusterlog-forwarding show
- D. application show-statistics
Answer: A
Explanation:
Since users are complaining about slow file access and you suspect the ONTAP cluster is the source of the problem, you need visibility into where latency is being introduced along the I/O path - specifically at the volume level, since file access happens through volumes (NAS shares/exports).The qos statistics volume latency show command breaks down latency into its component parts (similar to the workload latency exhibit seen earlier in this quiz), showing latency contributions from:
Network
Cluster (cluster-internal/backend communication)
Data
Disk
QoS (if QoS policies are throttling I/O)
NVRAM
Cloud (if using cloud tiering/FabricPool)
This granular breakdown allows you to pinpoint exactly where in the ONTAP stack the latency is occurring (e.g., disk-bound, network-bound, QoS-throttled, etc.) at the volume level, which is directly relevant to diagnosing slow file access issues tied to specific volumes.
Reference: https://docs.netapp.com/us-en/ontap/performance-admin/
NEW QUESTION # 95
A customer is trying to enable NVMe and wants to use the FC adapters in the controllers but cannot enable the protocol.
Referring to the exhibit, what is causing the problem?
- A. There are no FC adapters installed with a media type of NVMe.
- B. There are no FC adapters installed with a max-speed of 32Gbps.
- C. There are no FC adapters installed with the speed set to 32Gbps.
- D. There are no FC adapters installed with a physical protocol set to NVMe.
Answer: D
NEW QUESTION # 96
In clustered Data ONTAP, you just configured a new storage virtual machine (SVM) that SnapCenter Plug-in for Microsoft Windows needs to access to create Snapshot copies when running SnapManager for Microsoft Exchange Server.
However, when attempting to configure the SnapDrive transport protocol settings to communicate with the SVM, you receive the error shown in the exhibit.
Which three parameters are required in this scenario? (Choose three.)
- A. The role is set to cluster.
- B. The SVM name is the same as the CIFS server name when CIFS is enabled.
- C. The SVM name resolves to the management LIF's IP address.
- D. The data protocol is set to "none."
- E. The SVM management LIF firewall policy is set to management.
Answer: C,E
NEW QUESTION # 97
Exhibit:
Round-robin DNS has been configured for all data LIFs belonging to SVM1. There is a data LIF on every node of that 4-node cluster.
The administrator has reports from users of sporadic user access issues when accessing CIFS shares on SVM1. The administrator determines that one out of four attempts result in a "path not found error" message. The administrator believes that the issue is network related.
Referring to the exhibit, which statement is correct?
- A. "lif3" has been administratively configured down.
- B. "lif3" and "lif-4" are on different ports as "lif1" and "lif2".
- C. There is an issue with node clusterB-04's port e0d, causing "lif3" to be down.
- D. There are no issues found and all data LIFs are in a healthy status.
Answer: A
NEW QUESTION # 98
What are two valid storage layouts when using the SnapCenter Plug-in for Microsoft SQL Server?
(Choose two.)
- A. storing multiple databases per LUN
- B. storingmultiple LUNs in a volume
- C. storing database files on a LUN that contains the log directory
- D. storing a single database per LUN
Answer: B,D
NEW QUESTION # 99
What is the minimum number of compute nodes required to run the NetApp Deployment Engine for NetApp HCI?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
https://docs.netapp.com/us-en/hci/docs/taskhcigetstarted.html#:~:text=The%20minimum%20cluster%20for%20NetApp,to%2
0all%20NetApp%20HCI%20networks.
NEW QUESTION # 100
On an AFF system, which three storage efficiencies are enabled by default? (Choose three.)
- A. encryption
- B. compaction
- C. reallocation
- D. compression
- E. deduplication
Answer: B,D,E
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-vsmg%2FGUID- C1E3029E-1514-4579-939B-67160E849632.html
NEW QUESTION # 101
What will be the result of adding all nine spare disks to the aggregate?
- A. The aggregate will have three RAID groups.
- B. You receive the "maximum number of raidgroups exceeded" error.
- C. The aggregate will have seven RAID groups.
- D. The aggregate will have five RAID groups.
Answer: D
NEW QUESTION # 102
A customer reported an issue that requires more detailed diagnosis than what is provided in an AutoSupport message. The NetApp technical support engineer asked the customer to send a support bundle.
In this scenario, which NetApp tool would satisfy this request?
- A. OnCommand System Manager
- B. OnCommand Cloud Manager
- C. OnCommand Shift
- D. OnCommand Unified Manager
Answer: D
NEW QUESTION # 103
In ONTAP 9.6, activity on the command line is found in which log?
- A. command-history.log
- B. mgwd.log
- C. audit.log
- D. messages.log
Answer: C
Explanation:
Explanation/Reference: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/ Overview_of_ONTAP_Logs
NEW QUESTION # 104
Referring to the exhibit, which two components should be examined? (Choose two.)
- A. disk
- B. SAS adapter
- C. cluster switches
- D. network interface card
Answer: A,B
NEW QUESTION # 105
......
Truly Beneficial For Your Network Appliance Exam: https://examtorrent.dumpsreview.com/NS0-194-exam-dumps-review.html
