CTS-I Exam Dumps - PDF Questions and Testing Engine
CTS-I Dumps - The Sure Way To Pass Exam
NEW QUESTION # 274
Where should an optical disk player be placed in a rack?
- A. In the user's direct line of sight
- B. At the bottom of the rack
- C. At the top of the rack
- D. Next to an audio speaker
Answer: A
NEW QUESTION # 275
In the OSI Model, cables and routers are elements of _____.
Response:
- A. layer 4, the Transport layer
- B. layer 7, the Application layer
- C. layer 2, the Data Link layer
- D. layer 5, the Session layer
Answer: C
NEW QUESTION # 276
What type of drawing view shows the layout of items on the ceiling?
- A. Reflected floor plan
- B. Detail ceiling drawing
- C. Reflected ceiling plan
- D. Elevation drawing
Answer: C
NEW QUESTION # 277
__________ can transmit AV signals and other data up to a distance of 300 meters or more before signal quality is compromised.
Response:
- A. Coaxial cabling
- B. Multimode fiber-optic cabling
- C. Unshielded twisted-pair (UTP) cabling
- D. Shielded twisted-pair (STP) cabling
Answer: B
NEW QUESTION # 278
Which test verifies that a cable can transmit a signal from one end to another?
Response:
- A. Continuity test
- B. Impedance test
- C. Polarity test
- D. Signal sweep test
Answer: A
NEW QUESTION # 279
The published design weight of a speaker array with mounting hardware totals 96 kilograms (212 pounds).
What minimum weight should the substructure and mounting assembly be able to support?
- A. 962 kilograms (2,120 pounds)
- B. 192 kilograms (424 pounds)
- C. 227 kilograms (500 pounds)
- D. 480 kilograms (1,060 pounds)
Answer: D
NEW QUESTION # 280
An audio signal level that goes up to about 100V is _____ level.
- A. mic
- B. loudspeaker
- C. consumer line
- D. professional line
Answer: B
NEW QUESTION # 281
Which statement accurately describes what you should do when de-installing existing equipment?
- A. Remove the connecting cables
- B. Call an electronic waste recycling contractor
- C. Dispose of equipment right away
- D. Smash the hardware so that data cannot be stolen
Answer: A
NEW QUESTION # 282
What is the main function of a graphic or parametric equalizer?
- A. to balance voice, music, and other audio signals
- B. to adjust frequencies with fixed bandwidths
- C. to boost or cut a specific frequency range
- D. to adjust the bass and treble tones in audio
Answer: C
NEW QUESTION # 283
What causes the majority of problems in electronic systems?
- A. An impedance mismatch between devices
- B. Faulty connections
- C. The end user
- D. Poorly written system documentation
Answer: B
NEW QUESTION # 284
When training a customer on the operation of a touch panel interface, an example that the GUI is a good design that meets the customer's needs:
- A. The customer requires intensive training on the operation of the Touch panel
- B. The customer thinks the panel looks cool
- C. The customer wants only a few changes
- D. The customer can easily step in and use the Touch Panel with little explanation
Answer: D
NEW QUESTION # 285
When training a customer on the operation of a touch-panel interface, an example that the GUI is a good design that meets the customer's needs is:
- A. The customer can easily use the touch panel with little explanation
- B. The customer requires intensive training on how to use the touch panel
- C. The customer thinks the panel looks cool
- D. The customer wants only a few changes
Answer: A
NEW QUESTION # 286
Light energy _____ the farther you get from the source.
- A. spreads out
- B. intensifies
- C. changes color
- D. remains the same
Answer: A
NEW QUESTION # 287
There is a conflict between the wall plate height specified in AV documents and the height the electrical contractor is saying must be used on site. Which of the following forms would be used by the integrator to seek clarification of the correct mounting height of wall plates?
- A. Request for Information (RFI)
- B. Request for Change (RFC)
- C. Construction Change Directive (CCD)
- D. Change Order (CO)
Answer: A
NEW QUESTION # 288
Why is color temperature awareness important in the AV industry?
- A. "Whiteness" is subjective with ever changing definitions.
- B. AV equipment allows for adjusting the "whiteness" for optimal display.
- C. The AV industry strives to set the standard for "whiteness."
- D. People expect exact "whiteness" when viewing a display.
Answer: B
NEW QUESTION # 289
What is a control system?
- A. A strategy for managing workgroups
- B. An interface between a human and a machine or system
- C. An authorization policy
- D. A system for managing a network
Answer: B
NEW QUESTION # 290
What does 1000Base-T refer to?
Response:
- A. IP speed of 1 Gbps
- B. Ethernet speed of 1 Gbps
- C. Ethernet speed of 100 Mbps
- D. IP speed of 100 Mbps
Answer: B
NEW QUESTION # 291
Which of the following is mic-level voltage?
Response:
- A. 1.23 volts (+4 dBu)
- B. Up to about 100 volts
- C. to 0.0003 volts (-60 to -50 dBu)
- D. 0.316 volts (-10 dBV)
Answer: C
NEW QUESTION # 292
Which of the following stage lighting instruments is used as a spotlight?
- A. ELS or Ellipsoidal Reflective Spotlight
- B. Parabolic Aluminized Reflector Light
- C. PAR64
- D. Pan and tilt lighting
Answer: A
NEW QUESTION # 293
What is a benefit of using the verification standard for system closeout? (Choose all that apply.)
- A. It aligns outcome and performance expectations at an early stage in the project.
- B. It creates a common language between all parties.
- C. It provides a verifiable outcome.
- D. It reduces project risk through early identification of problems, thereby reducing the likelihood of remedial work.
Answer: A,B,C,D
NEW QUESTION # 294
Cameras installed _________ will capture the side of a participants head while they look at the display in front of them.
- A. Behind the presenter
- B. Too high up
- C. Too far to the left
- D. Too low down
Answer: C
NEW QUESTION # 295
When a transmitter or radio station creates noise in a microphone line, it is called _____.
- A. RFI
- B. hum or buzz
- C. a magnetic field
- D. EMI
Answer: A
NEW QUESTION # 296
What does a 3-LED tester test for?
- A. Neutral/ground shorts
- B. Open ground-wiring error
- C. Neutral/ground swap
- D. Fault terminations
Answer: B
NEW QUESTION # 297
An AV rack is a housing unit that _____ electronic equipment.
- A. protects and organizes
- B. identifies
- C. elevates
- D. cools
Answer: A
NEW QUESTION # 298
......
Pass AVIXA CTS-I Exam Quickly With DumpsReview: https://examtorrent.dumpsreview.com/CTS-I-exam-dumps-review.html
